Home page

Sludge vacuums and washers

GS II Single axle

SLAMSUGER

GS II E

The sludge extractor is equipped with reliable BPW stub axles with 180mm brakes. It features a Samson KS725 liquid ring pump with 1:2 mechanical gearing for reduced engine revolutions and hydraulic pressure/suction switching. There is a 6″ hydraulically operated spade valve in the rear hatch with additional valve flange and mounted 6″ gate valve flanges on both sides of the vacuum cleaner. The level indicator on the front shows the contents of the sludge tank and there is a galvanized sludge container.

The level indicator on the front shows the contents of the sludge tank and there is a galvanized sludge container. It is fitted with LED lights as required by law, hydraulic brakes, 1 rotating beacon (flash) and wide load marking.

The sludge extractor always comes with a joystick mounted in the tractor to operate all functions.

The machine is sandblasted inside and out, painted with epoxy on the inside and two-component paint on the outside, as well as galvanized loose parts. It has a stylish color combination of SAMSON green and silver-grey rims.

8,000/10,000 LITER CAPACITY

The Samson Agrolize vacuum cleaner is a powerful machine with reliable BPW jackshafts and 180mm brakes. It has a standard tank diameter of Ø1600 and is equipped with
Samson KS725 liquid ring pump with mechanical gearing.

The machine has hydraulic pressure/suction switching, 6″ hydraulically operated spade valve and level indicators. It has
a galvanized sludge tank, sandblasted finish, epoxy interior paint, statutory LED lights, hydraulic brakes and wide load marking. With 8″ loading tower and joystick for tractor mounting.

GS II SINGLE AXLE

Key Features

Please select listing to show.

GS II SINGLE AXLE

BASIC CONSTRUCTION AND EQUIPMENT

Wheel mounting

Alliance 620/75x34

Alliance 650/65x38

Alliance 650/65Rx38 pattern 550 grass

Alliance 800/65x32

Brake system

Hydraulic brakes

Air brakes, 2-circuit, without parking brake. Standard with manual brake force regulator.

Vakkum pump

Samson liquid ring pump KS 725 (725m³/h - approx. 15000L/min.)

Samson liquid ring pump TM 1600 (1500m³/h - approx. 25000L/min)

Transmission

Mechanical drive for vacuum pump - Belt drive

Hydraulic drive for vacuum pump

Loading tower

8" loading tower with 2 articulated joints and parking on both sides of the barrel. Inlet led to bottom inside the barrel

10" loading tower with 2 articulated joints and parking on both sides of the barrel. Inlet led to bottom inside the barrel

Control panel for all functions, with 2 joysticks

Remote control for all functions

Factory-fitted equipment

3" vertical roller 30m. incl. remote control (Telecrane)

3 1/2" vertical roller 27m. incl. remote control (Telecrane)

4" vertical roller approx. 15m. incl. remote control (Telecrane) Requires TM 1600 pump

Hydraulic outrigger

Factory fitted accessories

Advertising production and mounting on signs (Vertical roller)

Work light

Floodlight kit (2 LED on crane, 2 LED rear facing high and 2 LED rear-facing Low

Marker lights with flash (8 side and 2 rear)

Camera kits

2 pcs. surveillance camera 7" color monitor, 1 pc. on crane, 1 piece on the back

Painting

Other RAL color

Clear lacquer

Efficient SAMSON sludge vacuums and washers for every task

SAMSON is your reliable partner when it comes to efficient waste management and cleaning. Our combined sludge extractors/flushers are designed to handle a wide range of tasks, from sewer maintenance to sucking up drilling mud during underground drilling.

We offer a comprehensive range of machines to suit any job. From smaller units mounted on single axles to advanced trolleys on boogie undercarriages with air suspension, we have the solution for your needs.

With our flexible tank separators, you can easily adjust the ratio of clean water to sludge according to the demands of the job. And with the wireless two-way remote control, including the advanced Vario II control, you get total control and monitoring right in your hands.